Ruger Precision Rifle
Ruger Precision Rifles are not recycled hunting guns. They were created as rifles that are precision designed from scratch. The Ruger Precision Rifle comes with certain features that are vital in shooting competitively and PRS.
Stock folds with a single hinge. Buttpad includes a Picatinny section to accommodate a monopod stabilizing device.
Chassis System
Like the chassis of cars, the rifle’s chassis serves as the base that all other parts sit on. The trigger, the action, optic and barrel all rest in the chassis to provide a stable platform with consistent control that lets shooters strike their target from the same point every time. Chassis-based systems are generally far more customizable and modular than conventional stock options, allowing shooters to change various aspects of their platform.
Ruger Precision’s chassis for rifles is an exclusive design. It integrates a buttstock with a trigger guard and magazine well in a single piece. The tolerances are eliminated and this can affect the accuracy. The Ruger American proprietary action is the base of this method. It’s made of fully-circle bolt bodies as well as three lugs, an arrangement that is preferred by a lot of experts in accuracy.
The barrel is forged using cold-hammer and produces an encased inside that wears extremely well. Brass lifespan also grows. It also uses minimum chamber specifications in order to improve the precision.
The chassis is also equipped with M-Lok rail which is compatible with optics and accessories. This chassis features Type 3 hard-coat anodized and ceramic coated to prevent corrosion.
It’s a common selection among PRS participants, and it’s the sole one that is employed by both best 10 finishers from this season’s Open Division. During the 2022 season, this KRG C-4 chassis was used by everyone, with the exception of one of the top 10 shooters in all of both Open and Tactical divisions. The shooter selected the MPA Matrix Pro chassis, and the two other top-10 competitors in each division used the KRG C-7 chassis.
Three-Lug Bolt Head
The two latest fashions in American shooting -Long-range tactical shooting, and extreme accuracy focused on aerodynamics which are able to withstand breezes better than every previous bullet, advanced cartridges that propelled them with surgeon precision. They also have rifles capable placing those bullets at incredible distances. The Ruger Precision Rifle (RPR) blends these two trends in the same package. Its action is made of a substantial block of 4140 steel which is home to the body of a three-lug bolt that is mounted on the “lower” built from two pieces of 7075 T6 aircraft-grade aluminum to form the trigger housing as well.
The magazine well has been specially designed to accept magazines of multiple types. The P-Mags with twin columns are a perfect fit as well, however M110/SR-25/DPMS as well as steel Accuracy International mags will be a perfect fit. Manipulating bolts is simpler with the extra handle. The shroud of the bolt includes a place to store the Allen wrench, which is also included within the set.
A bolt that is full-diameter with a 60-degree bolt throw as well as dual Cocking Cams provide exceptional cycle-like operation. The three-lug head is nitrided for corrosion resistance, smooth operations and long-lasting. The bolt is also machined with a shallow bolt-stop groove, making mounts for scopes a lot easier than the standard flattop AR.
The stock is a unique design by Ruger which is known as its Precision MSR stock, with a luxurious and durable rubber butt rugerforsale.com pad, with a QD sling cup atop. It folds up to the left with a push of a button in addition to the length of pull and cheek piece adjustment that is simple to make with a lever that is pulled and using one of the two dials. Another cool feature of the stock is a section of Picatinny rail which can be found underneath to help support bags on the rear or even improvised rests for shooting from the prone position.
Adjustable Buttstock
Its RPR is a long-range, precision rifle which is unique to anything it has ever seen outside this Ruger Newport, New Hampshire factory. The RPR has a buttstock that folds that extends out from the rear of the receiver, and extends into its buffer tube. It has an adjustable buttstock to adjust the length of the pull as well as a recoil pad with a vertically adjustable position.
Additionally, it comes with a telescoping cheek rest that adjusts the vertical and horizontal positions to ensure that the eye of the shooter is aligned towards the scope or target. Shooters can alter the RPR in accordance with his personal comfort. The RPR can also be equipped with one rail section which can be used for a bipod or monopod.
One of the most impressive features of this gun is that it features a bolt shroud which extends towards the buffer tube. It prevents dirt from the handle while cycling.
The RPR is also equipped with a 24″ barrel that has a twist of 1:8 and chambered for 6.5 Creedmoor. This provides excellent accuracy and resistance to warping due to heat.
RPR comes with KeyMod handguard that allows for the use of a variety of accessories. At the top is an Picatinny Rail that runs along the entire length. It can be used to accommodate various lights and optical components. Also, there is a QD sling swivel attachment place on top of the handguard.
While the RPR was designed with the precision shooter in the back of my mind, I noticed the presence of a couple of minor faults. They’re difficult to change. It was necessary to apply a small amount of gun grease to get them to perform in a proper manner.
Adjustable Cheekpiece Adjustable
The cheek rest is with a set width from the factory. However, it is easily adjustable to the height you prefer. This cheek rest held in position by four screws that are adjustable in a variety of ways. In particular, you could make one side taller than another or tilt the cheek piece upwards. You can create a fit to shoot from any position such as prone, bench or even prone.
A section of Picatinny Rail can also be integrated within the stock. Additionally, it can be affixed to the monopod to provide stability. The cheek piece is quickly removed to clean and boresighting with no impact on the overall design of the stock. It is a major advantages for shooters.
The adjustment helps the shooter adjust his rifle to better fit the body. It improves comfort as well as precision. It also makes the rifle easy to carry, which enhances target acquisition. This feature is especially important to shooters with long ranges, who need to be able to shoulder their rifles comfortably for extended periods of duration.
Another aspect that enhances its ergonomics on this Ruger Precision Rifle is the adjustable comb and cheek riser. It is easy to adjust and are not affecting the scope picture or POI. The shooter can customize his rifle to suit their specific needs.
It is cold-hammer-forged from chrome-moly. It comes with 5R rifling. It has minimal dimensions of grooves and bores along with central chambers for controlling recoil. The barrel is medium-contoured and comes threaded for the use of a muzzle brake or compensator. Safety and frontend features as well as the pistol grip on the rifle are AR-style compliant.
Higher Accuracy
Ruger Precision Rifle (also rugerforsale.com known as RPR) is designed to be highly accurate and shoot at long ranges. The Ruger Precision Rifle is a combination of the reliability of a bolt-action gun, with the modularity and innovative features that are part of the AR platform.
The Multi-Magazine interface is a crucial feature that the RPR has to offer. It’s a patent-pending method that lets the rifle accept M110/SR25/DPMS and Magpul magazines. If a magazine is dropped into the rifle, the release paddle moves to become engaged with the back of the magazine, allowing the user to pull onto the reverse of the release lever to let the magazine go. Every rifle has two magazines with a 10-round capacity.
Alongside along with the Multi-Magazine Interface, the RPR features a linear recoil system and is engineered for maximum accuracy. This is achieved by redirecting the most unnecessary vibrations and movements to the buttstock. This minimizes the effect of these actions onto the barrel. This rifle’s accuracy is further improved by utilizing tight tolerances of the chamber grooves and bore.
The trigger of the RPR can be adjusted to draw weights that range from less than 5 pounds to up to 2 pounds. In conjunction with a top quality scope, and properly trained, the RPR is capable producing sub-MOA groups as long as 800 yards.